RTS Screen Prints and Sublimation Transfers Ship Same or Next Day. REMINDER!!! Orders containing Pre-Order Screen Prints will go out on the date listed on your PO invoice!!

Transfer Application

LOW HEAT Screen Print Transfer Application

Screen print transfers can be used on most shirts including 100% polyester, 100% cotton or most poly/cotton, tri-blend tees.

TO APPLY:
Preheat your shirt for 7-10 seconds
Press design on shirt for 7-10 Seconds at suggested temp.
Temperature: 325 Degrees Fahrenheit {depending on your location and your press}
Pressure: Heavy
Peel: Hot
Covers: No Teflon or heat protected cover is NOT needed. It will decrease heat to the transfer.

Due to all presses being different, you will need to test a screen to figure out what works best for your specific press.

*Washing Instructions*
- Wait 48-72 hours before washing.
- Wash inside out and avoiding fabric softeners will extend the life of the transfer.
- Avoid direct heat to transfer

HIGH HEAT Screen Print Transfer Application

High Heat Screen print transfers can be used on most shirts. 100% cotton works best for High Heat transfer.

TO APPLY: 

HIGH HEAT FORMULA! A HEAT PRESS IS NEEDED!

Preheat your shirt for 7-10 seconds
Press design on shirt for 7-10 Seconds at suggested temp.
Temperature: 375 Degrees Fahrenheit {depending on your location and your press}
Pressure: HEAVY! HEAVY! HEAVY!!
Peel: Hot
Covers: No Teflon or heat protected cover is NOT needed. It will decrease heat to the transfer.

Due to all presses being different, you will need to test a screen to figure out what works best for your specific press.

*Washing Instructions*
- Wait 48-72 hours before washing.
- Wash inside out and avoiding fabric softeners will extend the life of the transfer.
- Avoid direct heat to transfer

Sublimation  Transfer Application 

Sublimation must be printed on a shirt with at least 50% polyester. Many triblend shirts come in 65% polyester and are ideal. 100% polyester is recommended to give you the brightest colors.

PLEASE BE AWARE OF THE FOLLOWING IF YOU ARE NOT FAMILIAR WITH SUBLIMATION PRINTS:
-A house hold iron WILL NOT WORK for sublimation.
- The shirt must be a light color (white, gray or pastel colors). YOU CANNOT PRINT ON BLACK or very dark colored shirts.
- Hard substrates, like mugs and water bottles, MUST BE POLY coated for sublimation.
- Sublimation DOES NOT PRINT WHITE INK. If there is white in the design, it will become the color of the fabric or surface you apply it to.

TO APPLY:
Preheat your shirt for 7-10 seconds; Add a Teflon sheet in between the front and back of the shirt to ensure no bleed through. 
Temperature: 385-400 Degrees Fahrenheit {depending on your location and your press}
Press: Medium pressure for 45-65 seconds
Peek Test: You can lift a small corner of the image before lifting to ensure a good transfer. Re-press if needed, BUT DO NOT MOVE IMAGE OR YOU WILL GET SHADOWING.
Covers: Teflon or heat protection cover is recommended.

 

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods